XB LED Tail Lights: Corvette C7 (14-19 Facelift Set)

Corvette: There is something to be said about a Vette with four oval tail lights, and then there’s the latest and greatest C8 style…But if your C7 is stuck in the middle, where does that put you? It’s time to do something about that. So long as the rear-end of your Vette is the only thing that everybody sees as you fly by, it might as well look good as good as it sounds, right? Our new C8-Style XB LED tail lights for the C7 Corvette hit the nail on the head when it comes to quality, performance, and a modernized look.

Compatible

these are a direct bolt-on fitment for all Chevrolet Corvettes from 2014-2019 including the coupe and convertible. They use all the stock mounting points, include brand-new outer air-exhaust trim pieces, and should not take more than an hour or two to install.Plug n Play: The Corvette C7 Gen II tail lights from Morimoto are designed to work without any modifications. These LED tail lights will plug into the factory connectors for the stock lights on all US-spec cars, and do not need any extra resistors, modules, or adapters for a completely plug n play, error-free install. While the parking lights were problematic on earlier GenMorimoto tails for the C7, those kinks have been completely ironed out here – making these truly plug n play and problem free.

Functions

The C8-Style light pipes that dominate each housing acts as a low intensity parking light, a high intensity brake light (red). Above that, the reflectors operate as LED turn signals which can run in either a standard on/off flashing mode or a sequential setup, which is easy to change during installation. One of those two reflectors doubles as the white reverse light, which is also plug n play with your factory reverse light circuit.Back up Boost: Reverse lights are often over-looked, but not with the Morimoto XB Gen II tail lights for the C7 Vette. While they come standard with powerful LED reverse lights built into housing, just wait, there’s more! Morimoto’s Backup-Boost system allows you to plug n play with the optional LED Reverse Light Bar, which mounts to the top of your license plate frame and provides an extra 5000 lumens of controlled light output when in backing up. Yeah, Morimoto customers like to see where they’re going… no matter the direction!

Style and Safety

All Morimoto tail lights are designed to comply with all DOT, SAE regulations for rear-facing lamps. We pride ourselves on offering stylish, high-performance and safe products for serious enthusiasts, which is why all new Morimoto products are verified by trusted third party labs for compliance and are backed with an industry-leading five year warranty.

Specifications

• Input: GM Multi-Pin OEM
• Material: ABS Plastic (Housing), UV-Resistant Polycarbonate (Lens)
• Light Source: SSC LED
• Reverse Light: White
• Brake Light: Red
• Parking Light: Red
• Turn Signal: Amber
• Turn Signal Modes: Standard or Sequential
• Rear Reflex Reflectors: Smoked (Non DOT)

Included

• Tail Lights: 2x (One Pair) Smoked Lens XB LED Tail Lights
• Trim Bezels: 2x Tail Light Trim Bezels
• Clips: 2x Wire Clips
• Warranty: Five (5) Years

Compatibility

• Chevrolet Corvette C7: 14-19 (Stingray, Z51, Grand Sport, Z06, and ZR1)
• Replaces GM Part #: 23219535, 23170469, 23170470, 23219536
• Compliance: Not compliant for on-road use in US
• Note: These housings have been designed for, and tested on, US-Spec vehicles. Other countries' compatibility may vary and is not guaranteed nor always known.