14-19 Corvette C7 Gen 1 Headlight and Taillight Kit

Headlights

No Substitutes

Yeah the HID headlights that came on the C7 Vette's perform well enough, but as the saying go: stock sucks! Upgrade your setup to a full LED setup with Morimoto! Thankfully the new Morimoto XB LED headlights: Look great. Are well-built. Have a virtually infinite life span. An unbeatable warranty, and out-perform the alternatives. They are the first and last aftermarket option that the C7 Corvette Community needs, because when it comes to headlights: there is nowhere else to upgrade from here.

Performance

We've always been blown away by the fact that even though the C6 came from the factory with OEM HID headlights, the performance was sub-par. The low quality optics inside the lights were not only poorly designed to begin with, but often lose 50% or more of their intensity over time due to de-lamination of the reflector bowl inside - leaving you with next to no light output to illuminate the road. The good news is that Morimoto's 2014-2019 Corvette headlights produce a well defined beam pattern with a great amount of width, intensity, and a proper distribution of light that will far out-perform the stock setup.

DOT Approved

Make no mistake, these will produce a much different [better] result than slapping some LED replacement bulbs into your stock housings. Their projector optics meet & exceed all SAE, DOT, and FMVSS108 regulations when aimed properly... and that's easy to do with their integrated vertical/lateral adjusters.

Plug-n-Play

Wiring is easy too! This LED projector headlight kit is designed to work on your C6 Vette without any modifications. They will plug into the factory connectors for the stock headlights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install. No error codes, no flickering, hyper-flashing, or radio interference. They can easily be removed, and will not void your factory warranty.

Sequential LED DRL

Game Changer! Their LED daytime running light is powered by Osram 5000K LEDs and is insanely bright, easily visible during the day. They have a fully sequential LED turn signal behind modern "3D" type optics on the outside edge of the headlight too.

Well-Built

Their UV-coated polycarbonate lens will resist the test of time, ensuring your Vette's new headlights will look good as new for many years to come. The PPS plastic housing is light-weight and much stronger than comparable alternatives. The die-cast aluminum heat-sinks inside the housings provide more than an adequate amount of cooling for the OEM grade Osram LED chips that produce the light. These complete headlights may be new to the market, but Morimoto's XB LED fog lights have proven themselves perfect after 5+ years out now, which is confidence inspiring.

They Look

Amazing. At least in our opinion! The subtle elements incorporated in their design are more than enough to make them stand out, but they're clean enough to be considered top of the line original equipment to those who don't know any better.

Tail Lights

Corvette: There is something to be said about a Vette with four oval tail lights, and then there’s the latest and greatest C8 style…But if your C7 is stuck in the middle, where does that put you? It’s time to do something about that. So long as the rear-end of your Vette is the only thing that everybody sees as you fly by, it might as well look good as good as it sounds, right? Our new C8-Style XB LED tail lights for the C7 Corvette hit the nail on the head when it comes to quality, performance, and a modernized look.

Compatible

these are a direct bolt-on fitment for all Chevrolet Corvettes from 2014-2019 including the coupe and convertible. They use all the stock mounting points, include brand-new outer air-exhaust trim pieces, and should not take more than an hour or two to install. Plug n Play: The Corvette C7 Gen II tail lights from Morimoto are designed to work without any modifications. These LED tail lights will plug into the factory connectors for the stock lights on all US-spec cars, and do not need any extra resistors, modules, or adapters for a completely plug n play, error-free install. While the parking lights were problematic on earlier Gen Morimoto tails for the C7, those kinks have been completely ironed out here – making these truly plug n play and problem free.

Functions

The C8-Style light pipes that dominate each housing acts as a low intensity parking light, a high intensity brake light (red). Above that, the reflectors operate as LED turn signals which can run in either a standard on/off flashing mode or a sequential setup, which is easy to change during installation. One of those two reflectors doubles as the white reverse light, which is also plug n play with your factory reverse light circuit. Back up Boost: Reverse lights are often over-looked, but not with the Morimoto XB Gen II tail lights for the C7 Vette. While they come standard with powerful LED reverse lights built into housing, just wait, there’s more! Morimoto’s Backup-Boost system allows you to plug n play with the optional LED Reverse Light Bar, which mounts to the top of your license plate frame and provides an extra 5000 lumens of controlled light output when in backing up. Yeah, Morimoto customers like to see where they’re going… no matter the direction!

Style and Safety

All Morimoto tail lights are designed to comply with all DOT, SAE regulations for rear-facing lamps. We pride ourselves on offering stylish, high-performance and safe products for serious enthusiasts, which is why all new Morimoto products are verified by trusted third party labs for compliance and are backed with an industry-leading five year warranty.

Specifications

• Headlights: Intensity: 2,600lm (Raw; each)
• Traffic Pattern: LHD Only
• Input: GM Multi-Pin OEM
• Functions: DRL (White), Turn, Parking, Low, High
• Material: ABS Plastic (Housing), UV-Resistant Polycarbonate (Lens)
• Optic: Kuria Optic BI-LED
• UV Coating: Momentive UVHC3000
• Tail Lights: Input: GM Multi-Pin OEM
• Material: ABS Plastic (Housing), UV-Resistant Polycarbonate (Lens)
• Light Source: SSC LED

Included

• Headlights: XB LED Headlights: Corvette C7 (14-19 / Gen I / Set)
• Tail Lights: XB LED Tail Lights: Corvette C7 (14-19 / Smoked Lens Facelift / Set)

Compatibility

• Chevrolet Corvette C7: 2014-2019
• Replaces GM Part #: 23148368, 84501052, 23216692
• NOTE: These housings have been designed for, and tested on, US-Spec vehicles. Other countries' compatibility may vary and is not guaranteed nor always known.