C4 Brake Pressure Modulator Valve Rebuilding Service 1992-1995

This is a rebuilding service offered by Corvette Salvage for a C4 Brake Pressure Modulator Valve.

Body and trim: ZR-1, Base, 40th Anniversary Edition

This C4 Brake Pressure Modulator Valve Rebuilding Service will include the following:

• Rebuilt Electric 12 Volt Motor
• Cleaned and Reseated Valves
• New O-Rings Installed
• New Stainless Steel Valve Springs Installed
• Bench Testing of the Valves

The Corvette Salvage Crew has written a guide with the necessary steps needed BEFORE installing the rebuilt Brake Pressure Modulator Valve. Failure to follow these steps will result in a voided warranty for your unit.

Download the C4 Corvette Brake System Cleaning Guide, Revision 2.0

GM Part Number: 12516323

Bosch Part Numbers: 265212001, 464533648

C4 Brake Pressure Modulator Valve 1992-1995 Warranty Coverage Policy

(This Warranty Coverage Policy only applies to customers who purchased the additional 6-month, 1-year, 2-year, or 5-year warranty option at the time of the rebuilding service purchase.)

This product warranty shall be the exclusive remedy for the following defects or failures:

• Electric Motor Failure
• Solenoid Failure

This product warranty does not cover the two relays attached to the Brake Pressure Modulator Valve.

NOTE: Failure to follow the C4 Corvette Brake System Cleaning Guide BEFORE product installation will result in a voided warranty. To view the cleaning guide, click here.

When submitting a warranty claim, the Brake Pressure Modulator Valve must contain a defect in workmanship or material. The warranty does not extend to normal wear and tear, damage due to environmental conditions, including rain, snow, hail, salt, natural disasters, accident or collision damage, or damage caused by other faulty parts.

Upon return, the brake pressure modulator valve must not be damaged due to incorrect installation. Damage caused by abuse, misuse, improper repairs or maintenance, improper installation, alteration, or modification will not be covered by the warranty.

If your unit goes wrong, please submit a Warranty Help Ticket by clicking here. Please note that when submitting a claim, the customer is responsible for all shipping costs. (The estimated shipping cost to have a Brake Pressure Modulator Valve shipped ONE way within the continental United States is $25.00. This results in a minimum potential shipping cost of $50.00.)

General Warranty Limitations

The following provisions apply:

• The warranty is limited only to the original purchaser and is non-transferable.
• Under NO circumstances will our liability exceed the amount of the original sale.
• Each warranty does not cover labor costs or incidental, indirect, special, or consequential damages, such as, but not limited to, physical injuries or property damage, loss of time, loss of use of the vehicle, inconvenience, air freight charges, rental vehicle charges, towing charges, or accommodations resulting from a defect in or failure of the part.
• The original sales invoice must accompany all warranty claims.
• The warranty does not cover lost or stolen packages. Because the customer is the shipper, he/she is the only one who can file a lost claim with the shipping company. Therefore, the customer must coordinate and process the claim through the shipping company.

We do not authorize any person to vary this warranty's terms, conditions, or exclusions. If any provision of this warranty should become invalid or unenforceable because of any laws, the remaining terms and provisions shall remain in full force and effect. To the extent allowed under local law, the remedies provided in this C4 Brake Pressure Modulator Valve 1992-1995Warranty Coverage Policy are the customer’s sole and exclusive remedies.

After you order, ship your original part to:

Dino's Corvette Salvage, LLC

3545 Hwy 43 North

Picayune, MS 39466

You will also receive an email after ordering with further instructions.