C2-C3 New Modular Offset Trailing Arms 1963-1982

New reproduction modular Offset Trailing Arms for 1963-1982 Corvettes.

• T-arms are offset 2 inches but it doesn't not move the bearing assembly. You retain your factory strut bars and half shafts. By running an offset trailing arm, it will allow you to run a wider tire on a stock rim or run a wider aftermarket rim with more backspacing (18" wheels are needed to clear the leaf spring). A Teflon lined spherical bearing for reduced deflection and binding in the control arm pivot to increase handling and ride quality. You'll need to check for proper spring and sway bar clearance for wider than factory wheels. All offsets of this design will come with a stainless steel flexline kit that is universal and will work with both OE and Wilwood brake calipers.
• Updated design in 2026
• UPGRADABLE TO COILOVERS LATER ON
• Increases wheel backspace clearance over stock T-arms
• Not just for race cars, get increased handling with increased ride quality
• Bolts in similar to factory trailing arms
• No chassis modifications needed
• Can use OE bearing assembly, strut rods, half shafts, spring
• DOES NOT change the placement of the bearing assembly
• Replaceable spherical bearing at pivot point
• Durable black powder coating finish
• Van Steel Limited Lifetime Warranty
• SS Flex Brake Lines Included
• Depending on wheel size, you may need a shortened spring and narrowed sway bar (ASB-R-348OSK or ASB-R-349OSK)
• Quantity: 1 PR

Reference part number: TA-30.

GM Part Number: 215947