C2-C3 New Global West Suspension Replacement Standard Upper A-Arm Shaft 1963-1982

New reproduction global West Suspension Replacement Standard Upper A-Arm Shaft for 1963-1982 Corvettes.

• Corvette Standard Replacement Upper A-Arm Shaft.
• Fits the 1963-1982 C2 and C3 Corvette.
• Sold Individually.
• Manufactured in the United States.
• Can Be Used with Stock Upper Control Arms & Most Aftermarket Tubular A-Arms.
• Shaft Features a 5/8 Threaded locking Nut on the End of the Shaft That Holds the Bushing in Place Unlike a 3/8 Bolt.
• Will Not "Back Off" Unlike Bolts.
• 2 Shafts Required Per Corvette.
• Corvette Offset Upper A-Arm Shaft.
• When Rotated in the Arm, Can Increase Positive or Negative Camber.
• Offset Shaft Allows Enough Caster without Generating Too Much Neg. Camber.
• Note: We recommend installing the shaft so the lettering on the cross shaft faces the engine. This pushes the upper ball joint out, allowing you to increase caster and still maintain camber.
• Corvette Is A Registered Trademark Of The General Motors Corporation.
• Quantity: 1 KT

Reference part number: Mods #13569-1001.