A rear suspension assembly typically includes control arms, spindles, bearings, brake rotors and calipers, crossmember, drive shafts and shocks/springs.

$1,200.00

This is a good used Dana 44 rear differential 3.45 ratio with rear cover. It will fit 1984-1996 Corvettes. NOTE: Call 1 888 467 8388 to check mileage on units that are currently in stock

Used Part
$750.00

This is a good, used Dana 36 rear suspension assembly with a 3.08 gear ratio. This rear suspension is complete from rotor-to-rotor and fits 1988-1996 Corvettes.

Used Part
$1,600.00

This is a good, used Dana 44 rear suspension assembly with a 3.08 gear ratio. This rear suspension is complete from rotor-to-rotor and fits 1988-1996 Corvettes.

Used Part
Out of stock
$1,800.00

This is a good, used Dana 44 rear suspension assembly with a 3.07 gear ratio. This rear suspension is complete from rotor-to-rotor and fits 1988-1996 Corvettes.

Used Part
$1,800.00

This is a good, used Dana 44 rear suspension assembly with a 3.45 gear ratio. This rear suspension is complete from rotor-to-rotor and fits 1988-1996 Corvettes.

Used Part
Out of stock
$1,800.00

This is a good, used Dana 44 rear suspension assembly with a 3.54 gear ratio. This rear suspension is complete from rotor-to-rotor and fits 1988-1996 Corvettes.

Used Part
$750.00

This is a good, used Dana 36 rear suspension assembly with a 2.73 gear ratio. This rear suspension is complete from rotor-to-rotor and fits 1988-1996 Corvettes.

Used Part
$750.00

This is a good, used Dana 36 rear suspension assembly with a 2.59 gear ratio. This rear suspension is complete from rotor-to-rotor and fits 1988-1996 Corvettes.

Out of stock
$1,200.00

This is a good used Dana 44 rear differential 3.33 ratio with rear cover that fits 1984-1996 Corvettes.

$595.00

This is a good used Complete Rear Suspension Assembly (Complete) rotor-to-rotor that fits a 1997-2004 Corvette. This assembly includes: crossmember, lower and upper control arms, dr and pass spindles, hub assy, brake rotors, calipers, shocks, swaybar, links, leaf spring w/brackets. This is the complete assembly ready to install in your Corvette or ready to drop into [...]

$225.00

This is a good used Driver Rear Suspension Half that fits a 1988-1996 Corvette. Half Includes: Upper and Lower Rods, Knuckle w/Bearing, Caliper and Rotor, Strut Rod, Shock, Wheel Speed Sensor, Half Shaft

$1,500.00

This is a good used Dana 44 suspension 3.07 gear ratio. This suspension is complete rotor-to-rotor and will fit ‘unmodified’ into a 1985-1987 Corvette. A simple modification will allow it to fit a 1984-1996 Corvette. This suspension is also popular for Hot Rodders to fit under their custom rides! Picture is of actual assembly. ***Item [...]

error: © Corvette Salvage 2019