Corvette Assemblies

Corvette Salvage is the only source to get Corvette full assemblies for the best prices. We offer a variety of assemblies from the front of a Corvette to the rear. Assemblies set Corvette Salvage apart from our competition by allowing us to offer more value for a better price. Corvette Salvage is proud to offer our many assembly options. If you cannot find the assembly you are looking for, simply fill out a Parts Request form and let one of our representatives help out!


Door Assembly | Engine Accessory Kits | Engine Assembly | Engine/Transmission Assembly | Front Bumper Assembly | Front Clip Assembly | Fuel Injection Assembly | GTM Kit Car Assembly | Radiator/AC/Condensor Assembly | Rear Bumper Assembly | Rear Clip Assembly | Rolling Chassis | Suspension Assembly | Transmission Conversion Assembly

$1,200.00

This is a good used Dana 44 rear differential 3.45 ratio with rear cover. It will fit 1984-1996 Corvettes. NOTE: Call 1 888 467 8388 to check mileage on units that are currently in stock

Used Part
$295.00

This part is a good, used C4 Headlight Assembly which can be installed on a 1991 to 1996 Corvette.

Used Part
Out of stock
$1,350.00

Dino's Corvette Salvage sells used complete L83 Crossfire Injection Engine Assemblies that are tested and ready to install in your vehicle. The engines can be used as a direct replacement in any 1982 or 1984 Corvette or any custom street rod application.

Used Part
$2,350.00

Corvette Salvage offers used, complete ZF 6 speed transmission kit assemblies which can be used to swap out any Doug Nash or automatic transmission with a ZF 6 speed transmission.

Used Part
$750.00

This is a good, used Dana 36 rear suspension assembly with a 3.08 gear ratio. This rear suspension is complete from rotor-to-rotor and fits 1988-1996 Corvettes.

Used Part
$750.00$850.00

This item is a good, used C4 Front Suspension Assembly which can be installed on a 1988 to 1996 Corvette.

Used Part
Out of stock

Dino's Corvette Salvage sells used complete LS1 engine assemblies that are tested and ready to install in your vehicle. The engines can be used as a direct replacement in any 1997-2004 Corvette or any custom street rod application.

Used Part
$1,850.00

Dino's Corvette Salvage sells used complete LT1 Multi Port Fuel Injection Engine Assemblies that are tested and ready to install in your vehicle. The engines can be used as a direct replacement in any 1992 to 1996 Corvette or any custom street rod application.

Used Part
$1,650.00

Dino's Corvette Salvage sells used complete L98 Tuned Port Injection Engine Assemblies that are tested and ready to install in your vehicle. The engines can be used as a direct replacement in any 1985 to 1991 Corvette or any custom street rod application.

Used Part
$4,899.00

The Factory Five GTM Supercar Kit Donor Parts List consists of used, original GM parts from 1997 to 2004 Corvettes.

Used Part
$450.00

This part is a good, used C4 Passenger-Side Door Complete Assembly which can be installed on any 1984 to 1996 Corvette.

Used Part
$650.00

This assembly is a good, used C3 Front Bumper Impact Bar & Frame Extension which can be installed on a 1980 to 1982 Corvette.

Used Part
$1,600.00

This is a good, used Dana 44 rear suspension assembly with a 3.08 gear ratio. This rear suspension is complete from rotor-to-rotor and fits 1988-1996 Corvettes.

Used Part
Out of stock
$1,800.00

This is a good, used Dana 44 rear suspension assembly with a 3.07 gear ratio. This rear suspension is complete from rotor-to-rotor and fits 1988-1996 Corvettes.

Used Part
$1,800.00

This is a good, used Dana 44 rear suspension assembly with a 3.45 gear ratio. This rear suspension is complete from rotor-to-rotor and fits 1988-1996 Corvettes.

Used Part
Out of stock
$1,800.00

This is a good, used Dana 44 rear suspension assembly with a 3.54 gear ratio. This rear suspension is complete from rotor-to-rotor and fits 1988-1996 Corvettes.

Used Part
$750.00

This is a good, used Dana 36 rear suspension assembly with a 2.73 gear ratio. This rear suspension is complete from rotor-to-rotor and fits 1988-1996 Corvettes.

Used Part
$750.00

This is a good, used Dana 36 rear suspension assembly with a 2.59 gear ratio. This rear suspension is complete from rotor-to-rotor and fits 1988-1996 Corvettes.

$2,495.00

This is a good used LT1 engine assembly w/700R4 transmission w/89k miles that fits 1992-1994 Corvettes. It includes all engine accessories, wire harness and computer.  Note: The picture listed is for illustration purposes only.           This is NOT the actual item you will receive. This item ships truck freight. Please check [...]

$3,495.00

This assembly is a good, used C4 LT4 Engine which can be installed on a 1995 to 1996 Corvette. It includes all engine accessories, computer and wire harness. Note: The picture listed is for illustration purposes only. This is NOT the actual item you will receive.

Out of stock
$1,200.00

This is a good used Dana 44 rear differential 3.33 ratio with rear cover that fits 1984-1996 Corvettes.

error: Alert: Content on Corvette Salvage is copyright protected. For DMCA issues, contact (888) 467-8388.